Wear ring for 1990 Ultranautics SeaFlash
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wear ring for 1990 Ultranautics SeaFlash. May need sizing adjusted to fit based on how worn your machine is.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wear ring for 1990 Ultranautics SeaFlash. May need sizing adjusted to fit based on how worn your machine is.
This right here is why I bought a 3D printer. I was given a non-running 1990 Ultranautics Seaflash. One of the main issues was a large gap around the impeller due to wear in the housing. Parts for this machine are not available. The gap looked just big enough to 3D print a sleeve to tighten the gap and improve performance. Turns out it works! This small printed part coated in fiberglass resin actually makes this bike quite fun. Without it, the thing barely moves on the water. Printed with Overture PETG on an Ender 3 S1 Pro.
After this part failed, I cut a rectangular strip the same size out of aluminum sheet metal and JBWelded it into place of this ring.