Creality K2 Plus Extended Build Plate Guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Stranulas model with varying scaled versions
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a very hard time installing the build plate guides as made by Stranula, they would snap constantly when attempting to install them, so I simply put them into Fusion and extended their width slightly and the height so as to allow for a tight snap-on fit without breaking.
There are 3 variations. The file names are 04, 06, 08. Which simply indicates +0.4mm, +0.6mm, +0.8mm on the original model.
I also include the 3mf which has all 3 variations, setup and ready to go. The are arranged with +0.8mm at the back, then +0.6mm in the middle and +0.4mm at the front of the build plate.
I printed in Overture ASA.
If you cant work out how to install these I recorded this little video.
https://photos.app.goo.gl/SweQja7hrcW2HVgv8