1 / 5
GL.iNet GL-BE3600 (Slate 7) rugged Box with space for accessories and LTE Stick — zdjęcie 1
1 / 5

GL.iNet GL-BE3600 (Slate 7) rugged Box with space for accessories and LTE Stick

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A box to transport the GL.iNet GL-BE3600 (Slate 7) Travel Router including an LTE Stick and accessories

Ocena
5 / 5
Polubienia
11
Pobrania
121
Wydruki
2
Wyświetlenia
800
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This box was designed to perfectly fit the GL.iNet GL-BE3600 (Slate 7) Travel router and a HUAWEI E3372h-320 LTE-Stick (others may fit as well) leaving space below for accessories like the power supply, the USB-C Cable and a LAN cable.

Everything is printed in PLA, 0,2mm no supports needed (although I recommend to add support enforcers for the lid as it looks better then).

The Box and lid should be printed laying on the plain side, I don't know why Fusion always exports them vertical.You will need 6 M3x30 screws to finish the box, the inlay fits very tight so it doesn't fall out.