FNIRSI SWM-10 REMIX from Kostyantyn Polischuk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix design from Kostyantyn Polischuk @KostyantynPol_996395 of FNIRSI SWM-10 portable spot welding machine
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix design from Kostyantyn Polischuk @KostyantynPol_996395 of the FNIRSI SWM-10 portable spot welding machine rugged case.
What I improved on this design is the logo and detailed information of the FNIRSI SWM-10. (as seen in the pic).
Since the step file is provided by the original author I have revised the parts particularly the lid which I have make it blank for you to customize the labeling as you prefer.
Aside from the stl files of the parts, I have uploaded the print profile which I have custom tailored the parameters based in each part to optimize the integrity of the build.
======================================================================
Below are the parameters of per plate for your reference of the print profile:
Plate 1 - Top Lid:
Filament = Bambu Lab PETG-HF
Nozzle = 0.4mm
Layer height = 0.20mm Standard
Wall loops = 2
Sparse infill density = 15%
Sparse infill pattern = Rectilinear
Plate 2 - Base:
Filament = Bambu Lab PETG-HF
Nozzle = 0.4mm
Layer height = 0.20mm Standard
Wall loops = 2
Sparse infill density = 15%
Sparse infill pattern = Gyroid
Plate 3 - Seal:
Filament = Bambu Lab TPU 95A-HF
Nozzle = 0.4mm
Layer height = 0.20mm Standard
Wall loops = 2
Top surface pattern = Rectilinear
Bottom surface patter = Rectilinear
Sparse infill density = 100%
Sparse infill pattern = Rectilinear
Plate 4 - Latch:
Filament = Bambu Lab PETG-HF
Nozzle = 0.4mm
Layer height = 0.20mm Standard
Wall loops = 4
Sparse infill density = 20%
Sparse infill pattern = Gyroid
Brim type = Outer brim only
Brim width = 3mm
======================================================================