Ford Fob Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fob designed to replace the older Ford fob with molle attachement on the back.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I remixed this design for use with an external ballistic carrier using molle as the connection point. This design uses the internal geometry of the original to fit the rubber buttons, circuit board, and battery. The rest of the model was made using Tinkercad and adding my Etsy logo. Made using Elegoo PLA with 25% infill and automatic tree supports and it works well. For assemblely I used 4x M3x16 barrel screws with M3 nuts pressed into the back. I also make a PETG version for a bit more durability and temperature resistance. Given Florida temperatures, PETG is a minimum.
Update: This model is now out of date and I no longer use these files. I have redesigned the fob holder from the ground up and will be uploading the design at a later time.