1 / 2
Hijinx Catch 3 Spacer for 5.5" Lynx Springs — zdjęcie 1
1 / 2

Hijinx Catch 3 Spacer for 5.5" Lynx Springs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lets you convert your Hijinx pump assembly back into a Lynx pump assembly

Ocena
0 / 5
Polubienia
8
Pobrania
23
Wydruki
0
Wyświetlenia
166
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

What if we took the material removed to make the Hijinx and added it back in.  

Normally if you wanted to have a Lynx and Hijinx setup, you would need two plunger rod assemblies and two pump assemblies.  

With this mod all you need to do is pop the C3 spacer on the end of your Hijinx pump, add the pump spacer to the pump, insert your 5.5" Lynx spring of choice, and swap back to the standard Lynx plunger rod.  

This eliminates the need to have a dedicated Lynx pump assembly. 

Included are pump spacers that work with standard 2.1 geometry and the newer remnant geometry seen in Chance's remnant lynx, Deathtree's PKI lynx remixes, Spyder's Spydertek remixes, and my own Lynx/minx remixes.  


Print both solid, and make sure catch 3 is TPU for durability.  

Tagi