Insta360 GO 3s USWE Race 2.0 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to hold the magnetic pendant in a USWE Race 2.0 pack. 20 degrees tilt for a better POV angle while cycling.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
When using a hydration pack, I can never find a good way to attach the Go 3s--both the normal hat clip and Pivot clip fail to get reliable and good angles. And if you just use the pendant while wearing a pack, the straps will just knock the camera off. Ask how I know, and what it was like spending an hour scouring a crushed asphalt gravel road for a tiny black camera.
This solves that problem, at least for the USWE Race 2.0 pack. The wings slide between the double-layer elastic straps on the pack. I can't promise that it would never ever fall out, but it's a surprisingly secure solution. Use an o-ring or rubber band to secure the pendant into the holder.
If you have a Pivot Clip I have a much simpler model that works even better with it and offers loads of adjustability. But if you just have the pendant, this will do a great job with a fixed 20 degree angle.
Supports required during printing, there are a lot of 20-degree overhangs.