Low poly magpie lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mostly dark bird to lighten up your room.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
Low poly model, to be printed in parts for moderate sized printers. Can be glued together using some bits of 1,75mm filament for added support.
Requires:
- Piece of wood
- G9 lamp fitting
- G9 LED bulb
- Electrical wire
- Wire switch
- Rewire-able powerplug
- Screws
Requires a G9 fitting, that can be found either in hardwarestores, on amazon or ali-express. Be weary to get the slimmer 18mm diameter version, like this one for example.
After assembling all parts you may need to fill some gaps and do some sanding. The bar that holds the fitting is not keyed, you gotta estimate it out and glue it in place. having the fitting with a lamp already inserted may make that easier.
Find a nice stick in the woods, cut it to length and let it soak in bleach-water for a couple of days to make prevent it from continuing to rot away under your lamp.
Drill some holes for wires and the screw to hold in in place, also make some incisions for the legs to fit. Don't forget to pull the wires trough in advance, doing it after assembly makes it far harder.
I put LED lights in it, and those don't melt the PLA. I cant vouch for older halogen bulbs, use those at your own risk, as they can get quite hot.