Cord and hose retainer for sanding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split ring with dovetail locking pins for vacuum hose. Press-fit clip for power tool cord. Printed in ABS with 6 walls.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Not an original idea, but this is my original design. I wanted something that would stay on the vacuum hose and have the cord be easily removable. This fits 2.5in hoses common on shop vacs. Pictured here its on a hose from a 16gal Craftsman.
Split ring with dovetail locking pins for vacuum hose. Press-fit clip for power tool cord. I printed mine in ABS, 0.4mm nozzle, 0.2mm layer height with 6 walls. Other settings would probably work just fine too though. I liked the 6 wall layers best because that is effectively 100% infill for this small ring.
PETG or ABS is recommended for the press-fit and for some flexibility to get it around the hose. But lmk if PLA works for you.
I made mine to be a snug fit around the vacuum hose so it only rotates with some decent pressure. But loose enough so that its easy to clip the dovetails together with a light squeeze. I made the ring about 1mm smaller than the measured diameter of the hose. Same for the snap-fit cord clip; about 1mm smaller than the actual diameter. YMMV so use the parametric files to adjust sizes if needed.
The ring is very thin so its not super strong, but most of the forces are tensile and its not really bearing any weight anyway.
The dovetails are modeled with a very tight clearance and they may fuse slightly when printing. I had to gently break them apart after printing. The result though is a nice snug fit when clipped together. If you need to adjust this for your setup, adjust the “offset face” function in the fusion360 timeline.