Air tag holder for Edison Bikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for your airtag to be placed in the open hole in front of the back tire (see photos for example).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Airtag holder.
Tips:
Print in PETG or ASA or an equivalently UV and heat resistant material.
Print with 2 walls and 10% infill. This is to prevent signal blockage.
Print in a color that matches your bike.
Print the 2 halves with screw threads facing up, and their back side flat on the plate.
Use grid support for the unsupported area if you print the 2 halves per the prior tip.
Sandwich the airtag with the 2 halves, clip on the cap, slot the threaded rod part through the hole, and then secure with the nut.
The nut has an arrow indicating which direction to screw it in. The arrow should point towards the airtag.