1 / 1
XIAO nRF52840 Wio-SX1262 Meshtastic Enclosure with 18650 Battery for Desktop — zdjęcie 1

XIAO nRF52840 Wio-SX1262 Meshtastic Enclosure with 18650 Battery for Desktop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model uses the nRF52840 board. It stands a little bit taller than the ESP32S3.

Ocena
0 / 5
Polubienia
22
Pobrania
209
Wydruki
1
Wyświetlenia
2146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

What You'll Need:


18650 Battery Holder - https://amzn.to/4lnV6ej
Double-sided Foam Tape - https://amzn.to/4kRXAzW
Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS

Or get this and use your favorite SMA antenna:
IPEX-1 to SMA Female - https://amzn.to/43q5CuV

The Module:
XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic

https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html

Put It Together:

A WARNING to begin… Any time that you plug the device into a USB port, please make sure that you have both antennas connected. Use the tiny antenna that is included with the SEEED Studio device when you open the box to press the boot button when flashing your device.

I printed my parts on a Bambu A1 using the AMS, so I split the body and did a multicolor print. I have included that file as a .3mf if you have the ability to switch filament mid-print.

Print the pieces face down. While it is printing, solder the positive and negative leads from the battery holder to the bottom of the board. Once printed, screw the battery holder into place in the bottom of the enclosure. Slide the pins of the nRF52840 and SX-1262 into the cradle on the bottom of the enclosure. Secure it with double-sided foam tape. You may need more than one layer of tape.

 

Tagi