5.56X45 Nato cartridge model/snap-cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a 5.56 Nato round, made to Sami max dimensions. Use for design or as a snapcap to protect your firing pin.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
General:
A simple snapcap/dummy round/design aid for 5.56X45mm Nato
Why I designed this:
I'm designing a speed loader for pmags, and this was a first step in getting that tuned in.
Printing notes:
Layer height: .15 or finer is ideal unless you get strings or protrusions
Recommended Material: PLA or ASA
Supports: None
Infill: 20% Gyroid or triangle
Walls: 3
Other Modifiers: Depending on your printer, you may need to play with random seams to ensure proper fit. Don't go jamming this in your chamber without testing, because getting it stuck would not be fun.
Material Quantity: ≈2.6grams
I printed from PLA on Centauri Carbon at .16 layer height with 20% gyroid infill and 3 walls.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out: