Clipper Guard Organizer for Wahl Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact organizer tray to hold all the guard clips that come in the Wahl kit (No. ½ – 8, L, R)
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 205
- Wydruki
- 1
- Wyświetlenia
- 820
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a minimal and compact tray to hold your guard clips! Easily pull it out of the box when you're setting up shop, and put everything back in its place when you're done. Of course, the box isn't a requirement – maybe you just needed some place to store your clips.
My kit came with the following Wahl clips, and every slot is made for a specific size (refer to the pics for placement) :
- L
- R
- ½ (neon green)
- 1
- 1½ (magenta)
- 2
- 3
- 4
- 5
- 6
- 7
- 8
In order to cram as many clips as possible into a small footprint the fitment needed to be really precise. So in order to remove some of the clips, you may have to lift the one in front of it a little to pull out the one you want (clips 3–5 seem to be affected the most). Otherwise most should lift out easily.
I no longer have the original oil bottle, scissors or cleaning brush so there aren't any provisions for those. But there is a pocket for other misc things in the free space.
I have other accessories in my box that didn't come with the kit, so I the goal was to make sure there was space left for them. This is where you can put your combs, scissors, brushes and other accessories.
Printing is fairly straightforward. You'll want to enable supports (only on the bedplate) for the bottom curves. No other special instructions needed.