1 / 1
prusa i3 mk2 2.5s y carriage nut holders for bed leveling with silicon spacers — zdjęcie 1

prusa i3 mk2 2.5s y carriage nut holders for bed leveling with silicon spacers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

i3 mk2.5s y carriage nut holders for bed leveling with silicon spacer

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
148
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Made this for my Prusa mk2.5s bed leveling when using the silicon tube spacer mod , where you cut 6mm pieces of silicon tube and put them in place of the fixed mount on the y carriage.

The original y carriage belt holder for the mk2.5s I modified and added fixed nut holes so to make it easier to adjust heigh from the top.

I also made a little m3 nut holder so to hold the nuts on each corner of the y carriage.

Adjustments for the bed level are done from the top of the heat bead with the added silicon tube spacers under the heat bed and I found it annoying to have to try hold the nuts each time i wanted to make a little adjustment .

I am just using some longer countersunk m3 screws and 6 pieces of 6mm 5mm silicon hose that is compressed under the heat bed between the y-carriage .

 

ok well hopefully that makes sense , I may add some more photos latter , let me know if you found it helpful.

happy printing .

 

Tagi