LEGO F1 Collectible 4 car wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for 4 LEGO Formula 1 collectible series cars. Embossed with logos for F1 and LEGO
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an easy to print and mount to your wall with double stick tape, or drill a few small holes and use tapered screws.
The cars mount to the base with 2 studs that are extra long to create a firm clutch.
The mount is designed to be very light and efficient with filament. I printed it with 2 layers at the bottom and top, .2mm layers, and with adaptive cubic infill. The thin top layer combined with the infill design gave a nice texture to the top surface.
It used about 31g of filament and printed in 40 minutes.
I added a second version with extruded logos that allowed me to print them in different color filament without to many filament swaps.
