Bebejou bath stand feet and plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To plug up the metal pipes and cover with new feet.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Got a second hand bebejou bath stand with cracked feet and rust falling out of the pipes.
To make it all nice again: a plug to stick in the pipes and then feet to cover them.
Printed in PETG with 0.6mm nozzle, 0.3mm layer height, 20% infill, 6mm bottom and top solid layers.
You might need to adjust the sizing slightly for yours. For mine it fit nicely like this. You can put the feet on without them falling off, whilst still removable. For the plugs I just tried out which fits best for which leg and the 4 I printed worked out that way.
Not yet tested in action, but seems stable and fine! Forgot to take pictures of the plug. Well. It's a plug and it should insert with minimal amount extruding beyond the pipe ;)