1 / 5
Dsub9 shell extension for Atari XE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a shell for an extension or adapter for the Atari XE or Atari 520ST. The Atari XE has joystick ports hidden inside its case, so it is not possible to use standard Dsub9 cables. However, it is possible to make a short extension that fits into the ports. This can also be used with the Atari 7800, which has a similar problem.
The shell is intended for gluing.
Print it from PETG or PLA without support. The female part needs to be printed in two halves. A ready to print 3MF file is available.