1 / 2
EMI case for BG7TBL noise source
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extremely simple case for protection near environment from electromagnetic noise.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is very simple case which should be printed by conductive filament (here was used the Ampere PLA from Print-Me). Inside the case is noise generator on base of idea BG7TBL. This is nice quite wide range generator but if you need to have a control where is the output of the noise, it's ease to use this case. On the output SMA you can connect the simple antenna or any other emitter as you need. Could help to measure of radiation pattern of antenna, but also could help with many other measurements. :)