1 / 4
VzBot 235 Skirt with 25mm Lift
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lifts the printer by 25mm and adds a nice skirt.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
NOTE: The skirts are one-piece parts and require at least a 300x300 build plate (unless you use the included STEP files and mod them).
Leverages the stock feet and adds a 25mm spacer to each one.
Each spacer requires 4x M4x6x5 heat set inserts which the skirts attach to via M4x8 screws.
The skirts also (optionally) attach to the frame using the center hole and T-nut that you used for your bottom cover.
I recommend printing both the spacer and the skirts with PETG or ABS using 0.25 layer height.
