1 / 6
[complete] RC GMC DUKW (amphibious military truck) — zdjęcie 1
1 / 6

[complete] RC GMC DUKW (amphibious military truck)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

RC amphibious truck based on the WWII DUKW OR DUCK. it is 1/18 scale and uses parts from a traxxas trx4mt.

Ocena
0 / 5
Polubienia
30
Pobrania
209
Wydruki
0
Wyświetlenia
1510
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

print how you like but try to keep filament mass below 1100 grams for the parts themselves

dimensions:

length 20.5 in or 520 mm

width 5.6 in or 143 mm

height 5.5ish - 7ish in or 140ish - 177ish mm ~~~ depends on wheel and tire ~~~

you will have to slice the hull for printing yourself to fit your printer capabilities, i have integrated spots for 2.5x24 steel pins that if you do slice you slice there for ease of putting together for alignment purposes.

you will need to mirror the hull for the other half

 

WIP:(complete)

added rudder and updated rear hatch

 

 

PARTS NEEDED:

  1. 1 Traxxas TRX4 MT mainly for the axle lower shock mount for the front. it has 2 holes instead of the one. 
  2. if you opt for a normal TRX4M get this with it https://traxxas.com/9831-trx-4mt-front-rear-shock-mounts 
  3. (ARA320751) 2.5x24 steel pins i used the ones from arrma(horizon hobby)
  4. (ARA713009) 2.5X16.8 MM (OPTIONAL)
  5. (ARA320750) 2.5X37 (CENTER LINE MATING PIN)
  6. use what ever wheel and tire combo you want as long as they are equal to or less than 58mm OD
  7. if you want to use the provided wheel faces you will need the 1/24 proline bead lock wheels (super swamper)
  8. prop shaft combo https://www.amazon.com/dp/B09F2J2WCL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 
  9. motor paired with your choice of bushed esc https://traxxas.com/7575r-23-turn-brushed-370-size-motor 
  10. https://traxxas.com/9753-front-stub-axles-with-hardware 
  11. https://traxxas.com/9750-7-mm-wheel-hubs-4-with-axle-pins 
  12. https://traxxas.com/9855-trx-4mt-extended-center-driveshafts modify as needed
  13. https://traxxas.com/9745-self-lubricating-bushing-set 
  14. https://traxxas.com/2065t-waterproof-sub-micro-servo 
  15. PROTEK 5X5 GRUB ptk-h-4200
  16. 3x10 countersunk ptk-h-2203
  17. DUBRO DUB336
  18. DUB140
  19. DUB166
  20. DUB121
  21. super glue of your choice
  22. epoxy of your choice to seal the hull and seams
  23. for the canopy cloth i used this https://www.amazon.com/dp/B0C93MCCNV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 
  24. (OPTIONAL BUT NICE TO HAVE) https://traxxas.com/9848x-trx-4m-stainless-steel-hardware-kit 
  25. you'll need magnets to hold the cab in place as soon as i find the size ill post it here but they are like sub 3mm diameter and 1 mm thick
  26. washers for shimming the rear diff https://traxxas.com/1985-ptfe-coated-washers-20 
  27. 7x14x3.5 bearings for front shaft use heat shrink to shim between it and the actual shaft it will be very tight https://traxxas.com/10719-black-seal-ball-bearings-7x14x35-mm-2 

Tagi