1 / 3
18mm Watchband Attachement for 22mm Watchbands — zdjęcie 1
1 / 3

18mm Watchband Attachement for 22mm Watchbands

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This part broke on my watch, so I designed a new one. I nailed the dimensions after a few tries. It's pretty sturdy too.

Ocena
5 / 5
Polubienia
3
Pobrania
16
Wydruki
2
Wyświetlenia
76
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed in FreeCAD, printed mine on a P1S in PLA with 100% infill. I put the seams on inside surfaces. I recommend doing that, otherwise they might land on the corner of the hole for the pin and it won't fit. Otherwise it's a pretty simple part to print. It was specifically designed to fit the WOCCI branded watchband I got from Amazon.