Mercedes A2017270287 - W201 W124 - Door Panel Clip - Vapor Barrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mercedes door panel clip for the vapor barrier with part no. A 201 727 02 87, A 201-727-02-87, A-2017270287, A2017270287
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 894
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mercedes Part A 201-727-02-87
This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class).
Would love to hear some feedback!
Part number (various writing styles for better indexing) :
A 201 727 02 87
A 201-727-02-87
A-2017270287
A2017270287
Print Instructions:
Material recommendation: PPGF
Support Settings (universal)
Use sufficient "XY-separation" (2 mm)
Use sufficient "Top contact Z distance" (0.3 mm). Adapt depending on material.
The provided "printfile-4x-sequentially" prints a set of 4 clips sequentially.
The design is optimized for better printability compared while looking as close as possible to the original part. Including the optional part number. The file is provided as .stl, step and .3mf prusa slicer print file for a set of four clips. The .step file does not contain the part number as it was added in the slicer.
I highly recommend to use a water and heat resistant filament (at least 80° C). I recommend PPGF, PC, ASA, ABS Filament or similar. Especially when using PP i recommend filament with glass fiber addition but other polymers would also benefit from this. Filaments with carbon fibers might store water.