Dust Guard for ES Twilight II Alt-Az Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is meant to be used with a variation of the thrust bearing mod for the ES Twilight II telescope mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is designed to prevent dust/pollen/debris from getting into the thrust bearings on a modded Explore Scientific Twilight II mount. It also helps fill the negative space left by the bearings (since they're not the same diameter as the mount post).
Note: the bearing this is designed to work with fits the inner post of the mount, not the outside diameter of the mount. I used this bearing. Please make sure you're using the right one, or this dust guard won't work with your mount.