Olympia SM3 Typewriter Carrying Case Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement feet for the Olympia SM3 carrying case.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 124
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Carrying case feet for the Olympia SM3. Designed as a two piece replacement that fits very firmly and doesn't require any glue.
Installation:
- Very easy to install, just place the “P1” foot in the case first, it will hold itself generally. Then press the “P2” foot into the slot on “P1” while supporting the back side.
- If your feet seem to be slightly loose for whatever reason, you can add glue into the slot prior to inserting “P2”. Even if the glue doesn't chemically bond, it can help create a mechanical lock with the layer lines on both pieces. My personal case doesn't have any glue and has no issue with the feet staying in.
Material/Filament:
- Designed to be printed in TPU. Test pieces in the images were printed in 90A, but are a bit hard. I have tested other designs in 100% infill 75A and they are much softer but still hard enough.
Feel free to print for sale, but I ask that you make pricing reasonable as that is why I went through the effort to model these.