1 / 1
Tape Logic Carton Sealing Tape Dispenser Replacement Roller Wheel — zdjęcie 1

Tape Logic Carton Sealing Tape Dispenser Replacement Roller Wheel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement dispenser wheel for the Tape Logic carton sealer

Ocena
0 / 5
Polubienia
3
Pobrania
4
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

If you've found yourself on this page, chances are that you own a now defunct Tape Logic tape dispenser. The original roller wheels on these dispensers are quite brittle and failure prone. It'd be an absolute shame to throw out the entire unit because of a small, easily replaceable part. This wheel should get you back on your feet.

When disassembling the original dispenser, make sure to account for the small washer that sits between the inside of the metal enclosure and the connection point on the wheel. You'll need it for reassembly - it helps to keep the wheel relatively tight against the body when the screws are reinserted.

Likewise, be sure to put the metal tongue back into its correct position BEFORE screwing the assembly back together. You won't be able to do it post-reassembly. Trust me, I know. If you need a reassembly tongue reference, check the example photo in the model gallery. The metal tongue has to stick out in a very particular way.

Lastly, the OD (outer diameter) of this roller wheel is roughly 37.7 mm, with the length of the wheel measuring 53 mm. If you are trying to replace a wheel on a similar unit and the wheel is roughly the same diameter and length, this might just work for you. If not, reach out to me with your dimensions and a few pics - I might have time to whip up a custom roller.

Tagi