Race Medal Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model can be used to display race medals or any other items suspended from large bands. Use it for a cool display!
- Ocena
- 4,714 / 5
- Polubienia
- 67
- Pobrania
- 492
- Wydruki
- 8
- Wyświetlenia
- 1962
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
This model has two required items - the wall mount and the twist-on medal display. There are small tabs that let you rotate by 15 degrees and lock the medal into place on the wall. This is mounted to the wall with two rather small finishing nails, securing the design tightly to the wall.
You can use the included spacer files to add a clean and consistent gap between your medals and spin out into whatever grid design you want. I personally like the 5mm gap, but included 7.5mm and 10mm spacing as well. Once you print a few of these, you can make whatever design you like. Enjoy!