Polydryer Chamber Heater Adapter for Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts polydyer to fit on the side of the core one for active chamber heating
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 74
- Wydruki
- 4
- Wyświetlenia
- 2264
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounts to the side of the Core One, and you stick the polydyer on the holes. Make sure to print it with a material that can withstand the chamber temps you want to reach.
I also designed these clamp things that are supposed to hold the polydyer on but I would reccomend using string instead. (The string just wraps around the polydryer to keep it on)
Print one left piece and one right piece. The left piece is meant to be pushed on. Feel free to make your own version because my method of securing the two pieces together was very lazy. If your printer is tuned well it might not fit.
Polydryer temperatures (according to internet):
Mode 1: ~50C
Mode 2: ~60C
Mode 3: ~70C (Edit: I am able to reach 60C in the chamber with this mode and a 100C bed)
DISCLAIMER: I do not know how safe this is because the dryer can't communicate with the printer.
Edit: Added step file