Legacy of Yu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a complete re-design of the insert by alstewart04 with minor cosmetic improvements.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 116
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All credit goes to alsteward04 for the original design and concept, as my additions are minor and entirely supplementary. The only functional improvement is the addition of several card trays that can be used during gameplay. I like having card trays like this when using sleeved cards because they can be hard to stack, but this game only uses a dozen or so at most so they aren't actually necessary at all in practice.
Print 1x of each card box and token tray to start. If you want to use the card trays, at minimum print 2x of Card Tray Level 2; then either 2x of any combination between Riser Box and Card Tray Riser. The shorter version of the riser box should go on the same level as the shorter card tray in this combination (which I printed in red to use for the Barbarian cards).
Note: Pictures sometimes include older models for the card trays and riser; the newest versions are a bit shorter to eliminate any lid lift.