1 / 2
SHP9500 Ear Pad Adapter Plate (Brainwavz, etc...)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for fitting after-market ear pads to the SHP9500, works with Brainwavz oval ear pads and likely most
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 142
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This is an adapter for fitting after-market ear pads to the SHP9500, more specifically the Brainwavz oval ear pads. The design is based on the original earpad mounting plates but with a few small changes:
- holes for clips are mirrored so the part can be used left or right
- edges are rounded to reduce risk of tearing earpad
- added a groove to tuck away excess earpad material
- slimmed down slightly to make it easier to fit earpads over the plate
The following is how I installed the plate and earpads:
- pre-stretch the ear pads by fitting them over the plate and letting them sit for a while
- remove the ear-pad from the plate and install the plate on the headphone
- fit the ear-pad over the plate, fitting it on one end and working your way around
- tuck the excess material into the groove by pulling the earpads back a little and pressing the material into the groove with a fingernail
