Micro-Mesh sanding pad holder with well
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Micro-Mesh sanding pads organizer with well to keep them wet.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 175
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Micro-Mesh sanding pads are great for wood-turning items like epoxy pens. This design allows you to keep them organized, and also dip to replenish the liquid.
This is 3D printed plastic, so it will not be water tight, but it should be close enough. There are drains from under the mesh pads to return water to the well and also drain holes also added in the lid so you can allow final bits of water to escape as you go home with a pocket full of pretty pens.
The lid is held on pretty securely, with a dimple and hole on the short ends of the two pieces. The easiest way to open this is to slide the lid away from
Onshape Design can be found at https://cad.onshape.com/documents/88fd0ef5582bec094784ebde/w/a01a304d4e4e1aeb841d8997/e/336132a53489e862765ecdd3?renderMode=0&uiState=6882f7ee47fe2d784c9d63db