Battery pack FAP 40 A1 for Florabest / Extol tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New battery holder for replacing 18650 batteries with new ones without the need for welding. Just solder it together.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Battery holder for lawn mowers and other hand tools Florabest, Extol and others. Original designation FAP 40 A1. Simply purchase batteries with soldered cables and connect them in series. No welding required. Uses original electronics and housing. Pay attention to the correct polarity of the batteries.
For the left side, I recommend using supports where the cable runs from the battery. The rest of the model can be printed without supports.
Four M3x6 countersunk screws will be required for assembly.
The original holder has three small pins that can be replaced with a piece of 1.75 mm filament. The holes are already prepared in the model.
The STEP file for editing the design is available.
Here is a link to the batteries used: