Telescopic Tiny hand holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
General:
The must have accessory for on the go pointing.
Why I designed this:
The tiny hand was such a hit, I wanted to start adding accessory options
Printing notes:
Layer height: .15 or finer is ideal, but aesthetic only
Recommended Material: PLA
Supports: The clip should be printed on it's side to avoid splitting on the layer lines. Supports are needed on the upper dovetail edge only.
Infill: 15% Gyroid or triangle
Walls: 3-4
Other Modifiers: Print as oriented
Material Quantity: ≈23grams
Once printed, just slide the clip onto the mating feature. It clips lightly into place.
I printed from PLA on Centauri Carbon at .16 layer height with 15% rectilinear infill and 3 walls.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out: