Knitting Machine Needle Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Reverse Engineered a knitting Machine Needle using a POP scanner
- Ocena
- 0 / 5
- Polubienia
- 101
- Pobrania
- 455
- Wydruki
- 0
- Wyświetlenia
- 2334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I was trying to 3D print a replacement needle for my small knitting machine. I used the Revopoint POP scanner. I ran into a problem with it not being able to scan small parts. Support told me that part should be at least 50x50x50mm. I got around the problem by putting the small part on top of a larger one. Unfortunately this requires you to edit out the extra scan data. With such a small part, the three different scan views were pretty ratty. I managed to align them. I used a set of calipers to go over ever dimension I could and put the "correct" value in. I got a pretty good CAD model. My SLA 3D printer did a nice job with the print. Even my 3D EDM printer was able to print it (it was pretty ugly), but it still worked! I
Here are the things I used:
- Revopoint POP 3D Scanner ( https://amzn.to/35a6E1U )
- 22 needle knitting machine ( https://amzn.to/3JJDmGx )
- Elegoo Mars 2 Pro SLA Printer ( https://amzn.to/34NI1IL )
- Elegoo Mercury Plus Wash and Curing Machine ( https://amzn.to/34NI1IL )
- Isopropyl Alcohol 99%, One Gallon ( https://amzn.to/3s3HR8X )
- Overature Grass Green PETG filament ( https://amzn.to/3IMLghX )
FTC Disclaimer: We may earn commissions for purchases made through the links below. As Amazon Associates we earn from qualifying purchases.