Traxxas TRX4 & 6 - Chassis Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a few parts for my current TRX-6 project. Read the description.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 850
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I'm currently building a custom TRX-6 (with Jeep JK 6x6 body) and needed various special parts for it. Maybe someone can use them.
More parts will follow…. …
L and R in part labeling means left and right.
All parts are designed for M3 screws, some have holes in which M3 nuts must be pressed.
Most parts were designed that no support was needed during printing. I printed them in PLA with 15% infill.
Two speed are not supported.
Parts description:
front_bumper_mount_mid / bracket for the front bumpers with mounting exactly in the middle of the rails
front_bumper_mount_up / bracket for the front bumpers with 10mm offset upwards (can only be mounted upwards)
floor / custom floorpans that consist of several parts if you don't need the entire length / needs the “connect”stl to connect them (see photo)
floor_mid_XXL / the middle part as a large version that extends over the entire chassis (see photo)
floor_rear_XXL / the rear part of the floor pans as XXL version, you can also attach a battery to it
jeep_jk_6x6_slider / rockslider for a custom jeep jk 6x6 body based on the team raffee/injora hard body that I'm currently building
jeep_jk_6x6_magnet / magnetic mount for the custom 6x6 jeep jk I'm currently building
rec_box / an XXL receiver box that even fits the ESC