1 / 7
Steckdosenhalter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
The socket holder is used to securely and stably mount a power strip to the wall, under a desk, or other furniture.
It organizes cable management and prevents the power strip from falling or slipping.
Design Features:
- Precisely cutouts for these power strips
- Mounting holes for screw mounting to walls or furniture
- Optional: Cutouts for double-sided adhesive tape on the back
- Rounded corners and reinforced edges for increased break resistance
- Integrated cable holder clips for easy routing of power cables
Print Settings (Recommended):
- Layer Height: 0.2 mm
- Infill: 20–30%
- Wall Thickness: min. 2 mm
- Print Temperature: 205–215°C
- Heated Bed: 50–60°C
- Supports: Only necessary for overhangs
- Cooling: Active, recommended for PLA+
Special Features:
Good combination of stability and easy installation
Ideal for use in the home office, workshop, or under desks
No more slipping or falling of the power strip
The following power strip was used: