Styrofoam Cup Holder (20oz)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder with a handle for Styrofoam cups.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 130
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not everybody has hands big enough or strong enough to hold a full cup. I designed this holder to add a handle and make it more like a mug for easier handling.
Printing
Easy print using any material. Needs no support. The only special setting I used is scarf seam on the upper and lower parts – it is not required, but makes a smoother surface.
Assembly
Very easy to assemble.
- Slide the lower part up into the handle
- Insert a pin to hold it
- Slide the upper part down into the handle
- Insert a pin to hold it
- Drop in cup
Note: The upper and lower parts have an open area next to the handle. Use this area to push the pin out as needed.
Usage
I recommend you put the cup into the holder before filling it.
Note
The brand of the cup I tested appears to be WinCup®. I expect it will likely work for several other standard brands.