Tiny SA & Nano VNA storage box insert for Harbo Freight Apache 1800 Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed something better than the boxes they came in for storage so I built this.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 822
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an insert for the Harbor Freight Apache 1800 box that provides storage for the Tiny SA Ultra, and the Nano VNA H-4 along with an area for associated cables and adapters. The insert is tapered to the contours of the inside of the box to provide a snug fit. It should fit all the way to the bottom without force but be tight enough to prevent much movement.
I chose to print this model with PETG. I've included “mouse ears” pre-built on the model to help prevent warping during the print. Just make sure the side with the “mouse ears” lays flat against the build plate.
I'm also including a step file for the internal space of the Apache 1800 to make it easier for others to make mods for this box.