Allit Europlus Flex Insert with added pads and higher dividers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lets you create your own insert boxes for the Allit EuroPlus Flex system with or without dividers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original design lets you create your own insert boxes for the Allit EuroPlus Flex system with or without dividers.
Someone suggested to add some “feet” to lock them in place like it is in the original design. That's the main goal of this remix.
I then realised that if I fill my boxes with tiny pieces (like screws) and I want to store the box vertically everything will be mixed. So I decided to create a variation with higher divider to prevent this with some grooves to not impeed the closure of the lid.
You'll find variant with both changes as well as only one if you prefer.
Instructions
All that is needed to do is:
Open the file with OpenSCAD and enter the number of Rows, Columns and Dividers in the Customizer window.
No support material is required.
PS: it's the first time I use OpenSCAD and make parametric design so the code is probably not the prettiest. It works as expected in my (scarces) tests but if you encounter something weird, leave me a comment.