Hockey Stick Holder - Offset for Jerseys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
brackets to mount a hockey stick to the wall - offset far enough to use the stick as a hanger for jerseys
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple bracket that allows you to snap a hockey stick into. could be used to display or store a hockey stick on the wall. This design is offset to allow room for a clothes hanger to be hung from the stick so you can display your jerseys.
Instructions
- Print 2 or more of the brackets
- Install each bracket with a single screw (I used a laser level to make sure they were at the same height and wall anchors to hold the screws)
- Snap the stick into the brackets (In my case snap the stick on the ice prior to snapping it into the brackets)
- Hang Jerseys from it
I printed mine with PETG and 10% infill but I don't think the settings really make a difference on something this simple.
I will eventually upload a bracket which puts the stick closer to the wall although I believe that there is already some of those on printables.