1 / 6
Fisher and paykel ED56 clothes dryer low profile foot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement feet for a Fisher & Paykel ED56 clothes dryer. I have made the feet 10mm lower than the standard feet to cle
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Replacement feet for a Fisher & Paykel ED56 clothes dryer. I have made the feet 10mm lower than the standard feet to clear tighter spaces if needed.
I've had success printing in PLA+ with 25% infill but will be printing in TPU .4mm nozzle, .28mm layer height, 85% infill with supports to replace these very soon.