Locking Sun Visor Sunglasses Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Locking sun visor sunglasses holder with interchangeable clip sizes.
- Ocena
- 4,333 / 5
- Polubienia
- 136
- Pobrania
- 730
- Wydruki
- 2
- Wyświetlenia
- 4376
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to replace the clip in my car that started to fall apart. This design is split into 3 components:
- Locking Sunglasses Holder
- Sun Visor Clip (3 optional sizes). I recommend not using PLA as it will likely warp in on a warm sunny day.
- Flexible Inserts
The Locking Sunglasses Holder needs to be printed with supports placed under the release button.
Sun Visor Clip needs to be printed on its side with full supports.
Flexible Inserts needs to be printed using flexible filament. I printed using TPU 95A. If you are unable to print using flexible filament, you could substitute with weather stripping foam that goes around doors and windows.
Once all parts are printed. They should slide into place without the need for glue.
