RX7 FD3S Map pocket lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Map pocket lid model for the FD3S RX7
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Highly recommend using this instead: https://www.printables.com/model/1184266-fd3s-map-pocket-lid as Watch_ME completed the model.
99% finished model with .STEP file in case anybody wants to edit it - I stupidly broke the hinge area of my map pocket so was unable to finish the model and get it perfect, but uploaded it where it was. Thankfully, somebody else picked up the slack and finished the model, but figured I should upload it here with the .STEP file too :)
Picture is straight out the printer - Fuzzy skin enabled, Contour, 0.12mm point distance, 0.1mm thickness gets a roughly similar texture to the OEM. Probably better if you sand it and paint it though.