Case and Stand for ideaspark ESP32 1.9in LCD

This is a nice and clean case for the ideaspark ESP32 1.9in LCD from AliExpress.
Can easily be configured with ESPhome to display sensor readings from Homeassistant.

Its not a touch screen but it IS a nice low cost status display screen.

https://www.aliexpress.com/item/1005008852028066.html

• Its a click fit without the need for glue.
• Option for a case that is with or without a stand.
• Can be printed in PETG or PLA without issues.
• Looks fine in .20 quality profile

Printing

• The “Box Top” does not need any sort of support. Just print in place
• The “Box Bottom” also does not need any supports.
• The “Box Bottom (vented)” also does not need any supports. Its just got a few vent holes.
• The “Box Bottom (Stand)” can be printed with supports off the build plate only. I printed it with the legs facing up (no support on the legs). Printed on my MK3 with just a small amount of PETG stringing. The angle of the legs is just tight enough so it does not need supports.

The case does not have any holes for the buttons etc (the buttons are reset and boot loader which I didn't need)

I printed in black which looks good on the desk but does not photograph well.

I have also included a text file with example code to create the mini dashboard you can see in the photos. If you are not a code expert then just paste it into Chat GPT and ask it to help adjust it for your sensors. Its amazingly good.
Once you get the hang of the code its really easy to expand it and add additional sensors.

These screens are great for putting around the house to present information. In my case I often use it to see if I have extra solar power being generated.

Please send photos and a make if you use this.