Raktajino mug replica can holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12oz can holder shaped like one of the Raktajino mugs from Deep Space 9. No not that one, the other one.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Modified from “screen accurate” design to be slightly easier to print with the sweep of the handle. Requires minimal supports for the top and bottom of the handle, recommend Tree - touching build plate. Fuzzy skin on outside only to enhance grip.
Narrow channel to allow air to escape when inserting and removing cans opposite the handle.
Testing my print as soon as I have dried my filament and can print it on my very, very slow printer in the next day or so.
Can opening is 100mm deep to allow the top part of the can to be above and outside the plastic holder (measured a full size can at around 125mm tall), 132mm wide at the base. Doubles as a no-spill wide base mug for cans. Opening is 68mm diameter, measured a can here at 66-66.5mm wide.