1 / 2
Odroid HC4 Vesa mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A VESA 100 mount for Odroid HC4
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
The main feature of the Odroid HC4 is its ability to connect two HDDs, so it makes for a nice NAS solution, but it can also serve as a decent media center device or even combine the two roles.
I recently upgraded the NAS side of my setup, so I decided to promote the Odroid to media center running Corelec. This model allows to mount the device on the back of the TV via the standard VESA mounts.
Printing:
- Enable supports. Don't use organic supports, the default “snug” style works better with this model.
- Set 0 solid top and bottom layers, that way you'd get a ventilation grille.
- Adjust the fill percentage for a finer/coarser grille. In the pictures you can see the result with 30% infill.
Assembly:
Just install the PCB in the case with 3 of the original screws and mount the whole thing on the TV with M4 screws.