Filament Cleaner for Bambu Lab AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Cleaner for Bambu Lab AMS to simply clip on the AMS cartrigde (Version before 2023)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Filament Cleaner for Bambu Lab AMS to simply clip on the AMS cartrigde.
Suitable for AMS V2 with yellow parts, V3 has orange ones.
See this post: New V3 AMS’s Shipping (Silent Update)
If it suits to V3 too, please leave a comment.
Sponge
The cleaner was designed to use this sponges:
https://www.3djake.com/3djake/sponge-for-filament-cleaner-set-of-5
Sponge diameter 16 mm, length 30 mm - cut it into two parts
Printing
PLA or PETG, Nozzle 0.4 mm, Layer height 0.2 mm, 2 Wall loops, 3 top and bottom layers, outer brim, no need for infill. No support.
Mounting
Cut the delivered sponge (30 mm) in two halvs and place them in the filament cleaner. Clip the cleaner onto the cartridge (not really “clip”), and run the filament through the sponge and the housing. Push the filament through into the AMS cartrigde.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work