Can Holder w/ Slim Can Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insulating can holder with a built in adapter for holding slimmer cans (seltzers, red bulls, etc.).
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 175
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
**Working on this for the can holder contest**
I often switch between regular cans and drinks in the slimmer 12oz (335ml) cans so I wanted an insulating drink holder that would work for both while not requiring a bulky extra adapter that needed to be kept separate.
The design of the holder is such that there is low contact between the can and the holder resulting in 2 air gaps (can → air → plastic → air → plastic) around the majority of the cold beverage, keeping it cool for longer.
The slim can adapter fits seamlessly into the bottom of the can holder so that it is always there when you need it (it also provides an additional air gap at the bottom of the holder when not actively in use).
Print Details
Both main holder and adapter were printed with 0.6mm nozzle and a 0.3mm layer height for the attached pictures.
The bottom 10mm of the holder is printed with a 15% gyroidal infill (using a modifier) while the rest of the model uses 0% infill to allow for an insulating air gap between the walls of the model. Using 3 perimeter walls it is plenty strong printed in PLA. You can go to 4, but the air gap will be smaller and thus will be slightly less insulating. No supports needed.
The slim can adapter was printed with 3 walls and 15% infill.
This model is licensed under CC BY-NC. For commercial use or sales of printed objects, please contact me for permission.