1 / 11
Hexagonal Pencil Holders (Comes in 1, 2, 3, 4, 5, and 6!)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made these in freecad, this is my 2nd model i have modeled in freecad, hope you enjoy a more organised desk :)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane
I made these in freecad, this is my 2nd model i have modeled in freecad, hope you enjoy a more organised desk :)
On some models you will have to cut them, and put them on different build plates, or use supports and print them on the same build plate.
They print relatively fast, the triple only taking 4 and a half hours with stock settings! and single only taking 1 hour and 40 minutes with stock settings! (on BambuLab P1S)