"Tempo" tissue packet dispenser for Ikea Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another one of those simple holders for things. Holds eight packs of tissues.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Holder for eight packs of “Tempo” tissues (of course, any other brand of tissue with the same packet size will fit). The inner dimensions are 110x55mm, the slot at the bottom has a height of 25mm.
You will need to print this model with supports for the top side of the dispensing slot.
I used painted on tree supports. I would advise using custom/handpainted supports because the default settings of the slicers I used tend to create supports for the alignment pegs on the backside, which print perfectly well without supports.
Additionally, you will need four of the M2.5 Skadis T-Nuts by @6d6178 and four M2.5 DIN912 screws for mounting the holder.