Ender 3 X-Axis Cover w/ BTT SFS 2.0 Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to try a different take on where to mount the BTT SFS 2.0 to the Creality Ender 3 series printers.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Wanted to mount the new BTT SFS 2.0 up front so I could easily get to it for making adjustments and loading filament. I thickened the areas of the original model near the mounting bracket to accommodate the extra weight and made sure to add reinforcements to the mounting bracket since this part is not stationary. Also added additional wall layers around the mounting holes for added strength. I included slots to the side of the BTT SFS for tying off wiring harnesses out of the path of the filament.
Recommended Hardware:
3x 3Mx8 Socket Head Cap Screws w/flat washers
Test Print Specs
Yousu PLA+
Layer Height: 0.20
Speed: 70 mm/s
Infill: Honeycomb
Supports: Trees
Total Print Time: 3 hours 14 minutes